Operator's Manual

Folding the Handle
F olding or unf olding the handle impr oper l y can
dama ge the ca bles, causing an unsafe operating
condition.
• Do not dama ge the ca bles when f olding or
unf olding the handle.
• If a ca ble is dama ged, contact an Authoriz ed
Ser vice Dealer .
1. R emo v e the ignition k ey (model 20067 only).
2. Loosen the handle knobs until y ou can mo v e the upper
handle freely .
3. F old the upper handle forw ard as sho wn in Figure 37 .
Important: R oute the ca bles to the outside of the
handle knobs as y ou f old the upper handle.
Figure 37
4. T o unfold the handle , rev erse the ste ps abo v e .
Removing the Mower from
Storage
1. R emo v e the spark plug and spin the engine rapidly using
the star ter to blo w the ex cess oil from the cylinder .
2. Install the spark plug and tighten it with a tor que
wrenc h to 15 ft-lb (20 N ⋅ m).
3. Charg e the batter y for 24 hours (model 20067 only).
4. Connect the wire to the spark plug .
19