Service Manual

7-10

WPM Drive Systems Manual

WHEELPINIONCLUTCH

Reassemble in reverse order:

1. Install one thrust washer, then the rst retaining ring

with the sharp edge facing the chassis (Fig. 178).

5. Behind the pinion should be another thrust washer

and retaining ring (Fig. 144).

2. Lubricate with anti-seize and assemble in the

original order.

4. Slide the wheel pinion off the axle.

Note: Thereisaspring-loadedkeyunderthepinion

(Fig.177).

Fig177 MVC-850

A. Retaining ring and B. Key

thrust washer

Fig178 MVC-472