Service Manual

4-12

WPM Drive Systems Manual

SINGLESPEEDBEVELGEARTRANSMISSION

11. Pinch the ends of the lower handle together to

disengage them from the pins on the HOC plates

(Fig. 068).

8. Push it into the larger hole (Fig. 066).

12. Tip the mower onto its right side (carburetor up) and

remove the blade.

13. Remove one of the belt guide screws and loosen

the other enough to pivot the guide away (Fig. 069).

Do not bend the belt guide. Slide the pulley/blade

adapter and belt off the crankshaft.

Fig069 MVC-738

Fig066 PICT-1897

Fig068 MVC-737

9. Remove both rear wheels and both wheel covers.

10. Remove the stop cable from the engine (Fig. 067)

and disconnect the self-propel cable spring from the

transmission.

Fig067 DSC-017

A. Stop cable