Service Manual

4-22
WPM Drive Systems Manual
SINGLESPEEDBEVELGEARTRANSMISSION
13. Push the bearings and bearing retainers inward,
towards the transmission (Fig. 100).
11. Remove clip ring, keyed thrust washer, and standard
thrust washer (left side of mower has the standard
thrust washer, right side does not) (Fig. 098).
Fig100 MVC-297Xa
Fig098 PICT-1915a
12. Remove the snap ring, pivot arm and spring arm
(Fig. 099).
Fig099 PICT-1921a
14. Unhook the traction cable from the transmission belt
guide (Fig. 101 and Fig 102).
Fig101 PICT-1923