Service Manual

6-4
WPM Drive Systems Manual
3. There are a total of (5) rear bafe screws. There are
(2) screws, as shown, on each side and (1) screw
on the back of the machine under the bag door (Fig.
138).
22”SteelDeck-RearAxleBelt
Replacement
1. Remove (2) belt cover screws (Fig. 136).
GENERALTRANSMISSIONS
®
Fig.136 001
Fig.138 002
4. Tip mower on its side, air lter up. DO NOT tip the
mower with the air lter side down. Remove the rear
bafe and belt cover (Fig. 139).
Fig.139 003a
2. Move height-of-cut spring arms past the highest
setting to gain access to the fasteners on both sides
(Fig. 137).
Fig.137 002a