Operator's Manual

AdjustingtheCuttingHeight

WARNING

Adjustingthecuttingheightmaybringyouinto

contactwiththemovingblade,causingserious

injury.

•Stoptheengineandwaitforallmovingparts

tostop.

•Donotputyourngersunderthehousingwhen

adjustingthecuttingheight.

CAUTION

Iftheenginehasbeenrunning,themuferwillbe

hotandcanseverelyburnyou.Keepawayfromthe

hotmufer.

Adjustthecuttingheightasdesired.Setthefrontwheelsto

thesameheightastherearwheels(Figure12).

Note:Toraisethemachine,movethefrontcutting-height

leversrearwardandtherearcutting-heightleversforward.

Tolowerthemachine,movethefrontcutting-heightlevers

forwardandtherearcutting-heightleversrearward.

G027427

Figure12

1.Raisethemachine2.Lowerthemachine

Note:Thecuttingheightsettingsare25mm(1inch);35mm

(1-3/8inches);44mm(1-3/4inches);54mm(2-1/8inches);

64mm(2-1/2inches);73mm(2-7/8inches);83mm(3-1/4

inches);92mm(3-5/8inches);and102mm(4inches).

StartingtheEngine

1.Holdtheblade-controlbaragainstthehandle(Figure

13).

Figure13

1.Blade-controlbar

2.Pulltherecoil-starthandle(Figure14).

Note:Whenyoupulltherecoil-starthandle,pullit

lightlyuntilyoufeelresistance,thenpullitsharply

(Figure14).Allowtheropetoreturntothehandle

slowly.

Figure14

Note:Ifthemachinedoesnotstartafterseveral

attempts,contactanAuthorizedServiceDealer.