Electric - Recycler® 34 cm / 40 cm Model 34 cm 40 cm 21062 21072 Serial-No.: 220 000 101 & up.
General 3 Maintenance and Upkeep 15 Safety 5 Spare Parts and Troubleshooting 17 Assembly and Start-up 7 Hints on Tending the Lawn 23 Operation 11 © by TORO Company
1 General 1.1 1.2 Introduction Regulation on time limits for the operation of lawn mowers Technical data 1.3 1.1 Introduction The TORO lawn mower has been designed according to the latest technical and physiological aspects with due regard to the safety regulations in force. ®With its special equipment the Recycler -Mower can cut up grass and leaves several times. This superfine-cut material will be sprinkled into the lawn by the mower.
EC Declaration of Conformity to Directives 89/392, 91/368, 93/44, 93/68, 89/336, 73/23 (EN60335) 4 Certificate of Conformity Conforms to the Specifications of Directive 84/538/EEC Manufacturer The Toro Company, 8111 Lyndale Ave.So., Bloomington, MN 55420-1196, USA Product Name Toro Recycler® Serial Number 220 000 101 & up. Model Number 34 cm 21062 40 cm 21072 Noise information LWA = 85 db (A) LWA = 89 db (A) Signature, Title, Date VP Technical Manager Bloomington, MN, USA 01.07.
2 Safety 2.1 2.2 2.3 2.4 2.5 2.6 2.7 General notes Proper use Improper use Preparing the lawn mower for safe operation Safe operation Safe maintenance and storage List of symbols 2.1 General notes 1. Read the instructions carefully. Familiarize yourself with the operating elements and the proper use of the unit. 2. Children as well as persons who are not familiar with the instructions for use must not operate the lawn Observe the local age limits for the operation of the unit. 3.
2.7 List of symbols „Motor ON“ „Motor OFF“ „Adjustment of cutting height“ Warning Read the instructions for use before starting Third parties have to be kept out of the hazardous area Disconnect mains plug before servicing the cutting tool Always keep connecting cable away from blade. If the blade catches or cuts the cord, immediately unplug the cable from the outlet.
9 1 3 Assembly and start-up 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 Become acquainted with your lawn mower Setting the lawn mower up Mounting the wheels Mounting the handlebar Attaching the grass collecting device Adjusting the cutting height Proper cutting height Connecting the lawn mower 3.1 Become acquainted with your lawn mower 1 ON-OFF switch For turning the mower on and off.
3.2 Setting the lawn mower up 1. Open the tapes and lift the upper part of the carton (Fig. 2). 2. Take out the components and put them down (Fig. 2). 3. Check completeness of contents. Dispose packaging according to the local regulations. 3.3 Mounting the wheels Note: First mount the wheel bearing with the ”SmartWheel” scale on the left in the back. 2 3 4 1. Push the wheel bearing the ”Smart-Wheel“ scale on the lefthand side in the back onto the axle until engaged (Fig. 3). 2.
3.5 Attaching the grass-collecting device 1. Put the fabric of the collecting sack from behind onto the frame (Fig. 8). Slide the upper plastic profile underneath the handle to the front and clip it there. 2. clip the other plastic profiles around the frame. 3. clip the plastic profile (Fig. 9) 3.6 8 9 10 avarage height of lawn normal 11 dense Adjusting the cutting height Adjust cutting height only when the motor is turned off.
3.8 13 16 10 14 15 Connecting the lawn mower Important: Use only approved outdoor extension cables with a metallic section of at least 1.5 mm². • Check the cable for defects. Never use a damaged cable. • Keep the cable off the cutter when mowing. • Do not let the cable chafe on edges and pointed or sharp objects. Do not pinch the cable. 1. Fasten the connecting cable leading to the motor to the handlebar by means of the holding straps. 2. Connect the cable to the plug-in socket on the handlebar (Fig.
4 Operation 4.1 4.2 4.3 4.4 How to turn the mower on and off Recycling Mowing with grass-collecting device Mowing without grass-collecting device 4.1 How to turn the mower on and off Make sure that the mains cable does not lie next to the mower housing Turning on Important! Observe the right order of the starting operation, otherwise the motor will not start. 1. Put the mower on even ground. If the grass is high, tilt the mower slightly by pushing the handlebar down (Fig. 17). 2.
4.2 Recycling For recycling the Recycler plug must be inside the ejection channel. 1. Ensure that the motor and the cutter stand still. 2. Open the ejection door. 3. Push the Recycler plug into the ejection channel. The Recycler plug must lock (Fig.18) 4. Close the ejection door. To remove the Recycler plug, rum the motor off and wait until the cutter stands still. Open the ejection door and pull the Recycler plug out. Close the ejection door. • Ensure that the cutter is always sharp.
Should the motor have stopped due to the conditions inside the mower housing and block when restarting, it is absolutely necessary to clear the mowing tunnel from grass rests (Fig. 20). To clean the mower, disconnect the mains plug. Change the mowing direction frequently (Fig. 21). In case of an unsatisfactory mowing result: 1. Resharpen the cutters (Ensure not to create an unbalance). 2. Mow at a slower pace. 3. Increase the cutting height by one or two steps. 4. Mow your lawn in shorter intervals. 5.
4.4 Mowing without the grass-collecting device Never remove the grass-collecting device while the motor is running - danger of injury! Mowing without the grass-collecting device is recommended for mowing high grass or if no grass collection is desired. Remove the grass-collecting device and the Recycler-plug (Fig. 24 + 25).
5 Maintenance and upkeep 5.1 5.2 5.3 Checking the cutter for damages Cleaning the mower Storing the mower 5.1 Checking the cutter for damages Stop the motor, wait until the cutters stand still and disconnect the mains plug, when working on the mower. Danger of injury! After the mower has hit against a hard object as e. g. a stone, proceed as follows: • Turn the mower off and disconnect the mains plug (Fig. 26). • Lay the mower on its right side.
5.2 Cleaning the mower Before cleaning the mower, stop the motor, wait until the cutters stand still and disconnect the mains plug. Danger of injury! Do not wash the mower down with water. Danger of motor breakdown! Wipe off dirt and grass rests with a rag. Lay mower on its side and clean the bottom side of the mower (Fig. 28). 5.3 Storing the mower Disconnect the mains cable from the mower and store it in a safe place. 28 29 Clean the mower. Check all bolts, screws and nuts. Replace damaged parts.
6 Spare parts and troubleshooting 6.1 6.2 6.3 6.4 6.4.1 6.4.2 6.4.3 6.4.4 Hints on spare parts ordering Customer service address Troubleshooting Spare Parts Motor and Blade Assembly Chassis Parts Bag & Recycling Parts Handle Parts 6.1 Hints on spare parts ordering Use only original TORO spare parts or parts released by the manufacturer. This is the only way to guarantee for your safety and the safety of others. The nameplate bears type and serial number of your TORO lawn mower (Fig. 30).
TROUBLESHOOTING Problem Possible cause Remedial measures 1. Mains cable is not or not properly connected. 1. Connect the mains plug. 2. Defective motor. 2. Go to an authorized TORO customer service station. 3. Defective mains supply (fuse or switch) 3. Check the mains supply. 4. Too much grass rests inside the housing. 4. Disconnect the mains plug. Clean the housing. Coasting time of cutter longer than 3 seconds. 1. Defective coasting brake. 1. Go to an authorized TORO customer service station.
6.4 Spare Parts 6.4.1 Motor and Blade Assembly Model - No. 21060, 21061 & 21062 Ref.-No. Part -No. © by The Toro Company 1 2 3 4 5 6 7 8 9 10 95-6742 95-6723 95-6548 95-6748 95-6624 95-6632 95-6584 95-6598 95-6620 95-6714 11 12 13 14 15 95-6732 95-6582 95-6767 95-6743 95-6619 16 17 18 19 95-6623 92-2289 95-6532 95-6692 Description Motor Screw Fan Adapter-Motor Baffle-Motor Capacitor Clip-Capacitor Screw U-Clip Shroud-Motor (incl. Ref.
6.4.2 Chassis Parts Model - No. 21060, 21061 & 21062 Ref.-No. Part -No. Description 1 2 3 4 95-6795 95-6735 95-6734 95-6665 5 6 95-6543 95-6716 7 95-6544 8 9 10 11 12 13 14 * 17 95-6563 95-6562 95-6506 95-6564 95-6719 95-6741 95-6565 65-6709 95-6505 18 19 20 21 95-6700 95-6699 95-6560 95-6835 22 95-6666 * not illustrated 20 Housing Axle-Rear Axle-Front Wheel Assy. (incl. Ref.
6.4.3 Bag & Recycling Parts Model - No. 21070, 21071 & 21072 Model - No. 21060, 21061 & 21062 Ref.-No. Part -No. Description 1 95-6712 2 95-6842 3 4 5 6 7 8 9 10 11 13 * * 95-6508 95-6732 95-6578 95-6577 95-6765 95-6560 95-6553 95-6551 95-6555 95-6572 95-6854 95-6856 * not illustrated © by The Toro Company Rear Door (incl. Ref.#13) SpringRear Door Handle Screw Recycler Plug Kicker-Middle Kicker-Front Screw Frame-Bag Bag Ramp-Bag Decal-Safety Manual-GB ManualGerman/ Dutch/ French/ Italien No.
6.4.4 Handle Parts Model - No. 21060, 21061 & 21062 Ref.-No. Part -No. Description 22 1 2 3 95-6515 95-6517 95-6718 5 95-6713 6 95-6567 7 95-6568 8 9 11 12 12 95-6703 95-6740 95-6569 95-6605 95-6631 12 95-6630 * 13 65-6685 95-6598 14 15 16 17 18 19 95-6596 95-6598 95-6535 95-6529 95-6602 95-6597 Handle Lower Handle Upper Bolt & Screw Set- Handle Adjusting KnobHandle (incl. Ref. # 11) Adjusting DiskHandle Holding DiskHandle Bold Nut Nut M8 Switch Assy. Switch Assy. CH Switch Assy.
7 Hints on tending the lawn 7.1 7.2 7.3 7.4 Spring Summer Autumn Winter 7.1 Spring Cleaning: The first cut and the cleaning should be done two or three weeks before the normal growth starts. To mow, the cutting height should be adjusted in such way that approx. 1.5 cm of the resting grass will be cut off. Thus an early greening of the lawn will be effected.
The Toro Company, 8111 Lyndale Ave. So.
