Operator's Manual

ManualsBrandsToro ManualsLawn MowersToro 21136

FormNo.3392-675RevA

36cmElectricLawnMower

ModelNo.21136—SerialNo.315000001andUp

ModelNo.21141—SerialNo.315000001andUp

Operator'sManual

Safety

Readandunderstandthecontentsofthismanualbefore

startingthemotor.

Thisisthesafetyalertsymbol.Itisusedto

alertyoutopotentialpersonalinjuryhazards.Obeyall

safetymessagesthatfollowthissymboltoavoidpossible

injuryordeath.

Improperlyusingormaintainingthismachinecould

resultininjuryordeath.Toreducethispotential,

complywiththefollowingsafetyinstructions.

WARNING

Toreducetheriskofre,electricshock,and

personalinjurywhenusingthiselectricmachine,

alwaysfollowthesesafetyinstructions.

Thefollowingsafetyinformationhasbeenadaptedfrom

EuropeanStandardEN60335-2-77.

SafeOperatingPractices

GeneralInformation

•Readtheinstructionscarefully.Befamiliarwiththe

controlsandtheproperuseofthemachine.

•Neverallowchildrenorpeopleunfamiliarwiththese

instructionstousethemachine.Localregulationscan

restricttheageoftheoperator.

•Nevermowwhilepeople,especiallychildrenorpets,are

nearby.

•Theoperatororuserisresponsibleforaccidentsor

hazardsoccurringtootherpeopleortheirproperty.

Preparation

•Whilemowing,alwayswearsubstantialfootwearandlong

trousers.Donotoperatethemachinewhenbarefootor

wearingopensandals.

•Thoroughlyinspecttheareawherethemachineistobe

used,andremoveallobjectswhichcanbethrownbythe

machine.

•Beforeusing,alwaysvisuallyinspecttoseethattheblade,

bladebolts,andcutterassemblyarenotwornordamaged.

Replaceawornordamagedbladeandboltsasasetto

preservebalance.

•Tororecommendsthatthemachinebesuppliedwitha

residualcurrentdevice(RCD)havingatrippingcurrent

thatdoesnotexceed30mA.

•Useonlya1.00mm

sizeextensioncordthatisnotlonger

than30mandissuitableforoutdooruse(ifapplicable).

•Regularlyinspectthepowercordsforsignsofdamageor

aging.Replacethemimmediatelyiftheyaredefective.

•Donotusethemachineifanypowercordisdamaged

orworn.

•Donotconnectadamagedextensioncordtothemains

supplyortouchadamagedcordbeforeitisdisconnected

fromthemainssupply.Adamagedcordcanleadto

contactwithliveparts.

Handling

•Mowonlyindaylightoringoodarticiallight.

•Avoidoperatingtheequipmentinwetgrass,where

feasible.

•Alwaysbesureofyourfootingonslopes.

•Walk;neverrun.

•Forwheeledrotarymowers,mowacrossthefaceof

slopes,neverupanddown.

•Exerciseextremecautionwhenchangingdirectionon

slopes.

•Donotmowexcessivelysteepslopes.

•Useextremecautionwhenreversingorpullingthe

machinetowardyou.

•Switchoffthemachinewhentransportingitfrom1

cuttingareatoanother.Stopthebladewheneveryou

movethemachineoffthelawn.

•Neveroperatethemachinewithdefectiveguardsor

withoutmountedsafetydevices(forexample,deectors

and/orgrasscatchers)inplace.

•Switchonthemotorcarefullyaccordingtoinstructions

andwithfeetwellawayfromtheblade.

•Donotputhandsorfeetnearorunderrotatingparts.

Keepclearofthedischargeopeningatalltimes.

•Neverpickuporcarryamachinewhilethemotoris

running.

•Pulltheplugfromthesocket:

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUK

AllRightsReserved

*3392-675*A

Summary of content (16 pages)

PAGE 1
Form No. 3392-675 Rev A 36cm Electric Lawn Mower Model No. 21136—Serial No. 315000001 and Up Model No. 21141—Serial No. 315000001 and Up Operator's Manual Safety Read and understand the contents of this manual before starting the motor. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Improperly using or maintaining this machine could result in injury or death.
PAGE 2
Vibration, Hand/arm (Model 21136) – whenever you leave the machine; – before clearing a blockage or removing material from the chute; – before checking, cleaning, or working on the machine; Measured vibration level for right hand = 2.4 m/s2 – after striking a foreign object. Inspect the machine for damage and make repairs before starting and operating the machine; Measured vibration level for left hand = 3.2 m/s2 Uncertainty Value (K) = 1.
PAGE 3
CAUTION Long-term exposure to vibration while operating the machine may cause some numbness in the hands and wrists. Wear gloves that dampen the vibration whenever you operate the machine for an extended period of time. Waste of Electrical/Electronic Equipment (WEEE) • EU directive 2002/96/EC classifies this product as an electrical or electronic tool. • Do not dispose of this tool as unsorted municipal waste. • Dispose of this tool at a collection or recycling center according to local and national law.
PAGE 4
Setup Important: Do not connect the machine to a power source until the machine is fully assembled. 1 Unfolding the Handle No Parts Required g015106 Figure 2 Model 21141 Procedure 1. Cut the cable tie around the handle and remove the cable tie and the packaging material (Model 21136 only). 3. Tighten the knobs on the handle to secure it in place. 2. Carefully unfold the handle, keeping the cables clear of the pivot points so that they do not get pinched.
PAGE 5
Product Overview 2. Starting at the handle, connect the 6 plastic clips on the grass bag to the wire frame (Figure 4). 4 3 5 6 1 8 2 1 7 g015107 Figure 4 1. Start here and work downward. 9 3. Install the plastic cover onto the bag frame as shown in Figure 5. g015050 Figure 6 1 1. Handle knob (2) 6. Cord lock 2. Extension cord (not supplied) 7. Grass bag 3. Button 4. Control bar 8. Rear door 9. Height-of-cut lever 5. Handle Specifications Model 21136 21141 Weight 20.4 kg 27.
PAGE 6
Operation Planning Your Mowing Pattern Securing the Extension Cord Following the suggested mowing pattern will reduce the risk of running over the cord with the machine, and the cord will not sustain unnecessary wear. Do not allow the power cord to wrap around trees, shrubs, or other obstacles. Use only an extension cord recommended for outdoor, cold-weather use. Begin by mowing near the electrical power source. Mow back and forth, gradually mowing away from the power source (Figure 8).
PAGE 7
Adjusting the Height-of-Cut Setting DANGER Adjusting the height-of-cut setting could bring your hands and feet into contact with a moving blade and result in serious injury. g015054 Figure 10 Stop the motor and wait for all moving parts to stop before adjusting the height-of-cut setting. 5. Hold the control bar to the handle and release the button (Figure 11). 1. Stop the motor and wait for all moving parts to stop. 2.
PAGE 8
Bagging the Clippings Install the grass bag to collect the clippings. 1. Lift the rear door and remove the mulch plug (Figure 14). 1 1 G019212 Figure 16 Model 21136 shown 1. Mulch plug 2 G01921 1 Mowing Tips Follow these instructions when cutting grass for the best cutting results and lawn appearance. Figure 14 1. Rear door 2. Mulch plug • Maintain a sharp blade throughout the mowing season. • Mow only dry grass. Wet grass tends to clump on the 2.
PAGE 9
Maintenance Toro has designed this product to give you years of trouble-free use. Should the machine need service, take it to an Authorized Toro Service Dealer. WARNING When the machine is connected to a household power source, the machine is operational. Someone could accidentally start the machine and cause a serious injury to you or other bystanders. Always disconnect the machine from the power source whenever you leave the machine unattended.
PAGE 10
Servicing the Blade Always mow with a sharp blade. A sharp blade cuts the grass evenly, without tearing or shredding the grass. When you replace the blade, use only genuine Toro replacement blades. WARNING Someone could accidentally start the motor and cause a serious injury to the operator or to bystanders. 2 1 Do not attempt to inspect, remove, or replace the blade without first disconnecting the machine from the power source. g014059 Figure 19 1. Blade bolt 1.
PAGE 11
Servicing the On/Off and Blade-Brake System Storage 1. Clean the machine housing. The motor and blade are designed to stop within 3 seconds after you release the control bar. Ensure that the control bar functions properly each time before you operate the machine. If the blade does not stop within 3 seconds or there is a grinding or scraping, metal-to-metal noise when you release the control bar, contact an Authorized Toro Service Dealer.
PAGE 12
4. Store the machine in a cool, clean, and dry place away from children. 5. Cover the machine to keep it clean and protected.
PAGE 13
Troubleshooting Problem The motor does not start. Possible Cause 1. The extension cord is not connected to the machine. 1. Connect the extension cord to the machine and plug the other end of the extension cord into a normal household outlet. 2. The extension cord is damaged. 2. Check the extension cord, and repair or replace the cord if it is damaged. 3. Check the outlet fuse or the circuit breaker. 3. The fuse or circuit breaker is blown. The motor starts hard or loses power.
PAGE 14
Notes: 14
PAGE 15
International Distributor List Distributor: Country: Phone Number: Distributor: Phone Number: 57 1 236 4079 Colombia Japan 81 3 3252 2285 Czech Republic 420 255 704 220 420 255 704 Slovakia 220 Argentina 54 11 4 821 9999 Russia 7 495 411 61 20 Ecuador 593 4 239 6970 Finland 358 987 00733 Agrolanc Kft Balama Prima Engineering Equip. B-Ray Corporation Hungary Hong Kong Korea 36 27 539 640 852 2155 2163 82 32 551 2076 Maquiver S.A. Maruyama Mfg. Co. Inc. Mountfield a.s.
PAGE 16
Residential Products The Toro Warranty and The Toro GTS Starting Guarantee Conditions and Products Covered Owner Responsibilities The Toro Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly promise to repair for the original purchaser1the Toro Product listed below if defective in materials or workmanship or if the Toro GTS (Guaranteed to Start) engine will not start on the first or second pull, provided the routine maintenance required in the Operator's Manua