Operator's Manual

g193334
Figure22
DisengagingtheBlades
Releasetheblade-controlbar(Figure23).
g193345
Figure23
Important:Whenyoureleasetheblade-control
bar,thebladesshouldstopwithin3seconds.
Iftheydonotstopproperly,stopusingyour
machineimmediatelyandcontactanAuthorized
ServiceDealer.
CheckingtheBlade-Stop
SystemOperation
ServiceInterval:Beforeeachuseordaily
Checkthatthebladesstopwithin3secondsof
releasingtheblade-controlbar.
UsingtheGrassBag
Youcanusethegrassbagtochecktheblade-stop
system.
1.Removetherear-dischargeplug.
2.Installtheemptygrassbagonthemachine.
3.Starttheengine.
4.Engagetheblades.
Note:Thebagshouldbegintoinate,indicating
thatthebladesarerotating.
5.Whilewatchingthebag,releasethe
blade-controlbar.
Note:Ifthebagdoesnotdeatewithin3
secondsofreleasingtheblade-controlbar,the
blade-stopsystemmaybedeterioratingand,
ifignored,couldresultinanunsafeoperating
condition.Havethemachineinspectedand
servicedbyanAuthorizedServiceDealer.
6.Shutofftheengineandwaitforallmovingparts
tostop.
NotUsingtheGrassBag
1.Movethemachineontoapavedsurfaceina
non-windyarea.
2.Setall4wheelstothe89mm(3-1/2inch)cutting
heightsetting.
3.Takeahalfsheetofnewspaperandcrumpleit
intoaballsmallenoughtogounderthemachine
housing(about76mm(3inches)indiameter).
4.Placethenewspaperballabout13cm(5inches)
infrontofthemachine.
5.Starttheengine.
6.Engagetheblades.
7.Releasetheblade-controlbarandbegin
countingout3seconds.
8.Onthecountof3,pushthemachinequickly
forwardoverthenewspaper.
9.Shutofftheengineandwaitforallmovingparts
tostop.
10.Gotothefrontofthemachineandcheckthe
newspaperball.
Note:Ifthenewspaperballdidnotgounder
themachine,repeatsteps4through10.
14