[157) OWNER'S ' | OPERATING AND PARTS MANUAL TOR WHIRL TRIM fif 25 cents SERIES XL SERIAL NOS, 22017-1250 AND L& ::
TO THE WHIRL TRIM OWNER This Owner Manual has been especially prepared for your information and guidance in the operation and care of your new 18" Notary, Properly operated and maintained, this 18" Rotary will respond quickly and easily to every reasonable demand and give years of reliable service, SPECIFICATIONS ENGINE: Power Products, Model V-47 Type #A-605 Rope Start FUEL TANK CAPACITY: 1 Quart CUTTER BLADE: long, carbon steel. WHEELS: #18 Gauge steel discs w/oil impregnated powdered metal bearings.
To remove Custer Bar (Item 18) for sharpening, loosen cuter bar screw (Item 15} and remove from shaft. All the various cutter bar pairs are loose on shaft and can be easily removed, However when reassembling after cutter bar has been sharpened, be surety install part sin proper sequence {See schematic drawing). For sharpening the cutter bar, a good quality 16 inch mill-bastard file is recommended.
PARTS LIST Part No, Description Pauli’ 4 Part No. Description U}i(; a 1 2-9200 Main Frame 1 18 3253-6 Lock washer, 7/16" Regular 1 2 2-9280 Adapter Plate 1 ” WA -154 Washer 1 3 322-4 Resew, 5/16" N:C. X 7/8" 3 18 2-9220 Cutter Bar 1 4 32534 Lock washer, 5/16" Regular 3 18 2-9230 Hub, Cutter Bar 1 5 32562 Washer, 1/4" Cut 9 20 3212-8 Screw, 7/i16" N.F. 328-3 Resew, 1/4" N.F. X 5/8" 8 21 3256-25 Washer, E, 12 7 3256-22 Washer, 8§ 22 2-1120 Wheel Sp indie 4 8 3296-3 Nut, 1/4" N.F.