Operator's Manual

HydraulicFluid
Specications
HydraulicTankCapacity:56L(14.8USgallons)
Useonly1ofthefollowinguidsinthehydraulic
system:
•ToroPremiumTransmission/HydraulicTractor
Fluid(refertoyourAuthorizedServiceDealerfor
moreinformation)
•ToroPXExtendedLifeHydraulicFluid(refer
toyourAuthorizedServiceDealerformore
information)
•IfeitheroftheaboveT orouidsarenotavailable,
youmayuseanotherUniversalTractorHydraulic
Fluid(UTHF),buttheymustbeonlyconventional,
petroleum-basedproducts.Thespecications
mustfallwithinthelistedrangeforallthefollowing
materialpropertiesandtheuidshouldmeet
thelistedindustrystandards.Checkwithyour
hydraulicuidsuppliertodetermineiftheuid
meetsthesespecications.
Note:Torowillnotassumeresponsibilityfor
damagecausedbyimpropersubstitutions,souse
onlyproductsfromreputablemanufacturerswho
willstandbehindtheirrecommendations.
MaterialProperties
cStat40°C:55to62 Viscosity,ASTMD445
cStat100°C:9.1to9.8
Viscosityindex,ASTMD2270
140to152
PourPoint,ASTMD97-43to-37°C(-46to-35°F)
IndustryStandards
APIGL-4,AGCOPoweruid821XL,FordNewHolland
FNHA-2-C-201.00,KubotaUDT ,JohnDeereJ20C,Vickers
35VQ25andVolvoWB-101/BM
Note:Manyhydraulicuidsarealmostcolorless,
makingitdifculttospotleaks.Areddyeadditive
forthehydraulicsystemuidisavailablein20ml
(0.67oz)bottles.Onebottleissufcientfor15to
22L(4to6USgallons)ofhydraulicuid.Order
PartNo.44-2500fromyourAuthorizedService
Dealer.
Checkingthe
Hydraulic-FluidLevel
ServiceInterval:Every25hours
Checkthehydraulic-uidlevelbeforethemachineis
rststartedandafterevery25operatinghours.
RefertoHydraulicFluidSpecications(page34).
Important:Alwaysusethecorrecthydraulic
uid.Unspecieduidswilldamagethehydraulic
system.
1.Parkthemachineonalevelsurface,remove
anyattachment,engagetheparkingbrake,raise
theloaderarms,andinstallthecylinderlocks.
2.Shutoffthemachine,removethekey,andallow
themachinetocool.
3.Removethehood/frontaccesscover.
4.Cleantheareaaroundthellerneckofthe
hydraulictank(Figure35).
5.Removetheller-neckcapandchecktheuid
levelonthedipstick(Figure35).
Theuidlevelshouldbebetweenthemarkson
thedipstick.
g005158
Figure35
1.Fillerneckcap2.Dipstick
6.Ifthelevelislow,addenoughuidtoraiseitto
theproperlevel.
7.Installtheller-neckcap.
8.Installthehood/frontaccesscover.
9.Removeandstorethecylinderlocksandlower
theloaderarms.
34