Operator's Manual

g024162
Figure10
1.Dipstick3.Lower-limitmark
2.Upper-limitmark
Iftheoillevelisbelowthelower-limitmark,addoil.
Referto3FillingtheCrankcasewithOil(page9).
FillingtheFuelTank
DANGER
Gasolineisextremelyammableand
explosive.Areorexplosionfromgasoline
canburnyouandothers.
•Topreventastaticchargefromigniting
thegasoline,placethecontainerand/or
machinedirectlyonthegroundbefore
lling,notinavehicleoronanobject.
•Fillthetankoutdoorswhentheengineis
cold.Wipeupspills.
•Donothandlegasolinewhensmokingor
aroundanopenameorsparks.
•Storegasolineinanapprovedfuel
container,outofthereachofchildren.
•Forbestresults,useonlyclean,fresh(lessthan
30daysold),unleadedgasolinewithanoctane
ratingof87orhigher((R+M)/2ratingmethod).
•Oxygenatedfuelwithupto10%ethanolor15%
MTBEbyvolumeisacceptable.
•Ethanol:Gasolinewithupto10%ethanol
(gasohol)or15%MTBE(methyltertiarybutyl
ether)byvolumeisacceptable.Ethanoland
MTBEarenotthesame.Gasolinewith15%
ethanol(E15)byvolumeisnotapprovedforuse.
Neverusegasolinethatcontainsmorethan
10%ethanolbyvolume,suchasE15(contains
15%ethanol),E20(contains20%ethanol),orE85
(containsupto85%ethanol).Usingunapproved
gasolinemaycauseperformanceproblemsand/or
enginedamagewhichmaynotbecoveredunder
warranty.
•Donotusegasolinecontainingmethanol.
•Donotstorefueleitherinthefueltankorinfuel
containersoverthewinterunlessyouuseafuel
stabilizer.
•Donotaddoiltogasoline.
Important:Toreducestartingproblems,addfuel
stabilizer/conditionertofreshfuelasdirectedby
thefuel-stabilizermanufacturer.
Note:Thecapacityofthefueltankis3.76L(0.99
USgallon).
g230458
Figure11
AdjustingtheCutting
Height
Youcanchangethecuttingheightateachwheelby
adjustingacutting-heightlever.Cuttingheightsare25
mm(1inch),38mm(1-1/2inches),51mm(2inches),
64mm(2-1/2inches),76mm(3inches),89mm(3-1/2
inches),102mm(4inches),114mm(4-1/2inches).
DANGER
Adjustingthecutting-heightleverscould
bringyourhandsintocontactwithamoving
bladeandresultinseriousinjury.
•Stoptheengineandwaitforallmovement
tostopbeforeadjustingthecuttingheight.
•Donotputyourngersunderthehousing
whenadjustingthecuttingheight.
1.Pullthecutting-heightlevertowardthewheel
(Figure12)andmovethelevertothedesired
setting.
11