Operator's Manual

g024173
Figure12
1.Rearcutting-heightlever(2)
2.Frontcutting-heightlever(2)
2.Releasethecutting-heightleverandseatit
securelyinthenotch.
3.Adjustallthewheelstothesamecutting-height
setting.
StartingtheEngine
1.Connectthespark-plugwiretothesparkplug.
2.Openthefuelvalvebymovingthefuel-valve
levertotheright(Figure13).
g024165
Figure13
1.Fuel-valvelever
3.Movethethrottle-controllevertotheChoke
position(Figure14).
g024171
Figure14
Note:Donotusethechokewhentheengine
iswarm.
4.Holdtheblade-controlbarintheRun/Shift
position,about2.5cm(1inch)belowthehandle
(Figure15).
g024168
Figure15
1.Handle3.Blade-controlbarinthe
Run/Shiftposition—about
2.5cm(1inch)belowthe
handle
2.Blade-controlbarinthe
Run/Driveposition
4.Blade-controlbarinthe
Stopposition
5.Pullthestarterhandlelightlyuntilyoufeel
resistance,thenpullitsharply.
12