Operator's Manual

inches)and2angenuts(5/16inch)asshown
inFigure3.
3.Setthemachinetothedesiredcuttingheight;
refertoAdjustingtheCuttingHeight(page13).
4.Standbehindthemachineintheoperating
positiontodeterminethehandleheightthatis
mostcomfortableforyou(Figure4).
g024166
Figure4
1.Handle4.Mediumhandleheight
2.Handlebracket(2)
5.Lowesthandleheight
3.Highesthandleheight
5.Securethehandleontothehandlebracketsat
yourdesiredhandleheightwith2carriagebolts
(5/16x1-1/2inches)and2angenuts(5/16
inch)asshowninFigure5.
Important:Ensurethattheboltheadsare
ontheinsideofthehandleandthenutsare
ontheoutsideofthehandle.
g024169
Figure5
1.Carriagebolt—5/16x
1-1/2inches(2)
3.Flangenut—5/16inch(2)
2.Handlebracket(2)
6.Positioneachcableguardontothehandlewith
thecable(s)insidetheguard,andsecureeach
tothehandlewiththe2carriageboltsandthe2
locknutsthatyoupreviouslyremoved(Figure3).
Important:Ensurethatyoudonotpinchthe
cable(s)tothehandlewithwhenyouinstall
thecableguardsontothehandle.
2
InstallingtheRecoil-Start
Rope
NoPartsRequired
Procedure
Pulltherecoil-startropethroughtheropeguideon
thehandle(Figure6).
8