Operator's Manual

7
Assembly
Loose Parts
Note: Use the chart below to verify all parts have been shipped.
DESCRIPTION QTY. USE
Loader Arm Cylinder Locks
Clevis Pin
Cotter Pin
2
2
2
Use to lock loader arms during maintenance
Valve Lever 2 Install valve levers
Key
Training Video
Operator’s Manual
Registration card
2
1
1
1
View before operating machine
Read before operating machine
Fill out and return to Toro
Install Valve Levers
1. Thread a lever into the auxiliary hydraulics valve
and pump selector valve (Fig. 1) Levers to be
installed with bend toward operator.
2. Tighten jam nut on each lever to lock in
position.
1
2
Figure 1
1. Auxiliary hydraulics lever 2. Pump selector lever