Service Manual

CHAIN DRIVE/DRIVE SYSTEM
4/1-33Toro Wheeled CUL Service Manual
14. Loosen the wheel motor shaft nut with a 1-1/2”
socket (Fig. 0393).
13. Remove the chain from the wheel sprockets (Fig.
0392).
Fig. 0392 DSC-0203a
Fig. 0393 DSC-0205a
16. Using a 1-1/2” socket, pull the hub off the wheel
motor shaft (Fig. 0395).
15. Place a hub puller (Toro part #TOR6006) onto the
hub and secure it with the previously removed lug
nuts (tapered end of the lug nuts facing out) (Fig.
0394).
Fig. 0394 DSC-0210a
Fig. 0395 DSC-0212a