Service Manual

CHAIN DRIVE/HYDRAULICS
4/2-29Toro Wheeled CUL Service Manual
5. Remove the hydraulic hard line connected to the 90º
tting located on the left side of the selector valve
(Fig. 0641).
7. Remove the four bolts, spacers, washers, and nuts
securing the valves to the upper frame (Fig. 0643).
4. Remove the tie strap that holds the two hydraulic
hoses to the tting between the two valves (Fig.
0640).
6. Remove the hydraulic hard line connected to the 90º
tting located on the right side of the auxiliary valve
(Fig. 0642).
Fig. 0640 PICT-9943a
Fig. 0641 PICT-9944a
Fig. 0642 PICT-9947a
Fig. 0643 PICT-9949a