Service Manual

ALL UNITS/GENERAL
3/1-60 Toro Wheeled CUL Service Manual
42. Install an o-ring into the groove in the housing
mounting ange face (Fig. 0217).
Fig. 0217 IMG-0267a
43. Making note of the markings on the housing and
mounting ange, install the pump housing over the
11 gpm pump assembly and onto the mounting
ange (Fig. 0218).
Fig. 0218 IMG-0269a
44. Making note of the markings, install the 5gpm pump
inner bushing (Fig. 0219).
45. Install the 5gpm pump drive gear into the pump
assembly (Fig. 0220).
Fig. 0219 PICT-2836a
Fig. 0220 IMG-0270a