Operator's Manual

Maintenance

Accessing the Engine and

Internal Components

Before opening any of the covers, stop the engine and

remove the key.

Opening the Hood

1. Pull out the hood latch in the front screen

(Fig. 16).

2. Swing the hood up until it locks open (Fig. 16).

m–4737

Figure 16

1. Hood 2. Hood latch

Closing the Hood

1. Pull up on the bar securing the hood in the open

position and lower the hood (Fig. 17).

m–4771

Figure 17

1. Bar

2. Secure the hood by pushing down on the front of

the hood until it locks in place.

Opening the Rear Access Cover

1. Pull out and forward on the latch to remove it

from the locking bracket on the traction unit

frame (Fig. 18).

2. Swing the rear access cover to the right

(Fig. 18).

m–4670

Figure 18