Service Manual

TX 413 Service Manual
1-3
Rev. 000
SAFETY INFORMATION
Avoid modifi cations...
Never alter or modify any part unless it is a
factory approved procedure.
Avoid unsafe operation...
Always test the safety interlock system
after making adjustments or repairs on the
machine. Refer to the Electrical section in
this manual for more information.
Hydraulics Safety
• Inspect all hydraulic line connectors and
fi ttings. Make sure all hydraulic hoses and
lines are in good condition before applying
pressure to the system.
• Keep body and hands away from pin hole
leaks or nozzles that eject high pressure
hydraulic fl uid. Use cardboard or paper to
fi nd hydraulic leaks. Hydraulic fl uid escaping
under pressure can penetrate the skin and
cause injury. Fluid accidentally injected into
the skin must be surgically removed within
a few hours by a doctor or gangrene may
occur.
• Before disconnecting or performing any
work on the hydraulic system, lower the
loader arm/attachment to the ground and
stop the engine so all pressure is relieved.
• Be sure you understand a service
procedure before working on the machine.