Service Manual

Rev. 001

This service manual was written expressly for Toro service technicians. The Toro company has

made every effort to make the information in this manual complete and correct.

Basic shop safety knowledge and mechanical/electrical skills are assumed. The Table of

Contents lists the systems and the related topics covered in this manual.

For service information on drive systems, please refer to the Hydro-Gear BDP-10 pump

service manual (492-4789) and Parker-Ross TF wheel motor service manual (492-4753).

For information specic to the engines used on this unit, refer to the appropriate engine

manufacturer's service and repair instructions.

2004 and 2005 TX 413 units are covered in this manual. The manual may also be specied for

use on later model products.

The hydraulic power system is precision machinery. Maintain strict cleanliness control during

all stages of service and repair. Cover or cap all hose ends and ttings whenever they are

exposed. Even a small amount of dirt or other contamination can severely damage the system.

We are hopeful that you will nd this manual a valuable addition to your service shop. If you

have any questions or comments regarding this manual, please contact us at the following

address:

The Toro Company

LCB Technical Services

8111 Lyndale Avenue South

Bloomington, MN 55420

The Toro Company reserves the right to change product specications or this manual without

notice.

ABOUT THIS MANUAL