Service Manual

Rev. 000
Recommended Maintenance Schedule
MAINTENANCE
3-8
TX 413 Service Manual
Maintenance Service Interval
Maintenance Procedure
8 hrs
Grease the traction unit
Check engine oil level
Check for loose fasteners
Inspect the tracks for damage or wear
Change hydraulic filter after the initial 8-10
operating hours
25 hrs
Check hydraulic oil
Inspect hydraulic lines for leaks
50 hrs
Clean the foam pre-filter with liquid soap and warm
water
Clean the paper air filter by lightly tapping on flat
surface
100 hrs
Change engine oil
Replace paper air filter
Check battery electrolyte level
Adjust track tension
Check battery cable connections
Check the spark plug
200 hrs
Check hydraulic filter
300 hrs
Replace the spark plug
400 hrs
Inspect fuel lines for leaks
Change hydraulic oil and filter
Yearly Storage
Check for loose fasteners
Touch up chipped paint
Adjust track tension
Check tracks and road wheels
Complete all yearly maintenance procedures
specified in the engine operator’s manual
Charge the battery and disconnect the cables
(storage only)
Drain the gasoline (storage only)