Operator's Manual

g004173
Figure36
1.Fillcap2.Valvecover
9.Slowlypouronlyenoughoilintothevalvecover
toraisetheleveltotheF(Full)mark.
Important:Donotoverllthecrankcase
withoiltopreventdamagingtheengine.
10.Replacethellcapanddipstick.
11.Closethehood.
ChangingtheEngineOil
1.Starttheengineandletitrunfor5minutes.
Note:Thiswarmstheoilsothatitdrainsbetter.
2.Parkthemachinesothatthedrainsideisslightly
lowerthantheoppositesidetoensurethatthe
oildrainscompletely.
3.Lowertheloaderarms,engagetheparking
brake,shutofftheengine,andremovethekey.
4.Removethedrainplug(Figure37).
g005556
Figure37
1.Oildrainvalve
5.Whentheoilhasdrainedcompletely,replace
theplug.
Note:Disposeoftheusedoilatacertied
recyclingcenter.
6.Removethellcap(Figure36)andslowlypour
approximately80%ofthespeciedamountofoil
inthroughthevalvecover.
7.Checktheoillevel.
8.Slowlyaddadditionaloiltobringtheleveltothe
F(Full)markonthedipstick.
9.Replacethellcap.
ChangingtheOilFilter
1.Draintheoilfromtheengine;refertoChanging
theEngineOil(page29).
2.Whentheoilhasdrainedcompletely,replace
theplug.
Note:Disposeoftheusedoilatacertied
recyclingcenter.
3.Placeashallowpanorragunderthelterto
catchoil.
4.Removetheoldlter(Figure38)andwipethe
surfaceofthelteradaptergasket.
g004199
Figure38
1.Oillter
5.Pournewoilofthepropertypethroughthe
centerholeofthelter.Stoppouringwhenthe
oilreachesthebottomofthethreads.
6.Allow1to2minutesfortheoiltobeabsorbed
byltermaterial,thenpourofftheexcessoil.
7.Applyathincoatofnewoiltotherubbergasket
onthereplacementlter.
8.Installthereplacementoilltertothelter
adapter.Turntheoillterclockwiseuntilthe
rubbergasketcontactsthelteradapter,then
tightenthelteranadditional1/2turn.
9.Removethellcap(Figure36)andslowlypour
approximately80%ofthespeciedamountofoil
inthroughthevalvecover.
10.Checktheoillevel.
11.Slowlyaddadditionaloiltobringtheleveltothe
F(Full)markonthedipstick.
12.Replacethellcap.
29