Operator's Manual

Maintenance
Note: Deter mine the left and right sides of the mac hine from the nor mal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the rst 8 operating
hours
Replace the hydraulic lter.
After the rst 50
operating hours
Change the engine oil.
Change the oil lter.
Check and adjust the track tension.
Before each use or daily
Check the engine oil level.
Check the cooling system.
Grease the traction unit.
Drain water and other contaminants from the fuel lter/water separator.
Check the condition of and clean the tracks.
Clean the radiator.
Remove debris from the traction unit.
Check for loose fasteners.
Every 25 hours
Check the hydraulic uid level.
Every 100 hours
Change the engine oil (more frequently when operating conditions are
extremely dusty or sandy).
Check the battery electrolyte level (replacement battery only).
Check the battery cable connections.
Check and adjust the track tension.
Check the cooling system hoses.
Check the alternator/fan belt tension (refer to the Engine Operator’s
Manual for instructions).
Check the hydraulic lines for leaks, loose ttings, kinked lines, loose
mounting supports, wear, weather, and chemical deterioration.
Check for dirt build-up in the chassis.
Every 200 hours
Replace the primary air lter.
Change the oil lter (more frequently when operating conditions are
extremely dusty or sandy).
Replace the hydraulic lter.
Every 250 hours
Check and grease the road wheels.
Every 400 hours
Check the fuel lines and connections for deterioration, damage, or loose
connections.
Replace the fuel lter canister.
Change the hydraulic uid.
Every 500 hours
Replace the alternator/fan belt (refer to the Engine Operator’s Manual
for instructions).
Every 600 hours
Replace the safety air lter.
Every 1,500 hours
Replace all moving hydraulic hoses.
Yearly
Change the engine coolant (Authorized Service Dealer only).
Check the condition of the hydraulic pump belt.
27