Operator's Manual

Removing the Side Screens
1. Open the hood.
2. Slide the side screens ( Figure 23 ) up and out of
the slots in the front screen and frame .
Figure 23
1. Side screen
Installing the Side Screens
Slide the side screens into place in the slots in the
front screen and frame .
Lubrication
Greasing the Traction Unit
Grease all pi v ot joints ev er y 8 operating hours and
immediately after ev er y w ashing .
Grease T ype: General-pur pose g rease .
1. Lo w er the loader ar ms and stop the engine .
R emo v e the k ey .
2. Clean the g rease fittings with a rag .
3. Connect a g rease gun to eac h fitting ( Figure 24
and Figure 25 ).
Figure 24
Figure 25
4. Pump g rease into the fittings until g rease begins
to ooze out of the bearings (appro ximately 3
pumps).
5. Wipe up any ex cess g rease .
Engine Maintenance
Servicing the Air Cleaner
Primar y Filter : R e place after ev er y 200 operating
hours or more often in dusty conditions .
Safety Filter : R e place after ev er y 600 operating
hours .
Note: Ser vice the air cleaner more frequently if
operating conditions are extremely dusty or sandy .
29