Installation Instructions

7.Ensurethatthetrackdeectslessthan0.6to1
cm(1/4to3/8inch)when20.6kg(45lb)offorce
isappliedtothetrackspan.Adjustthetorqueon
thetensioningboltasneeded.
8.Tightenthejamnut.
9.Tightentheclampboltsandtorqueto102N∙m
(75ft-lb).
10.Lowerthemachinetotheground.
AdjustingtheHydraulicHoses
Thehydraulichosesunderthecontrolpanelabovethe
brakeleverneedtobeorientedsothatthe45degree
elbowinthehosettingpointstotherightasshownin
Figure6.Iftheyarenot,loosenthehosettingsand
orientandtorquethemasshowninFigure6.
g019227
Figure6
1.Torqueto40.6N∙m(30
ft-lb)
2.Torqueto57N∙m(42ft-lb)
Checktheoperationofthebrakehandletoensure
thatitdoesnotcontactthehoses.Ifitdoes,adjustthe
hosesfurtheroruseacabletietoholdthemaway
fromthebrakehandle.
AdjustingtheParkingBrake
Pullupontheparkingbrakehandle.Youshouldstart
tofeelresistance(i.e.,thebrakebarcontactsthe
track)whenthehandleisparalleltotheoorwhen
viewedfromtherightside.Ifcontactismadebefore
orafterthispoint,adjustthebrakeasfollows:
1.Removethebottomshield.
2.Loosenthejamnutunderbrakeplateonthe
threadedbrakeadjustmentrod(Figure4).
3.Liftthebrakehandlejustuntilthebrakebar
contactsthetrack.
4.Tightenorloosenthejamnutabovethebrake
plateonthethreadedrod(Figure4)asneeded
untilthehandleisparalleltotheoorwhen
viewedfromtheside.
5.Tightenthejamnutunderthebrakeplateto
securethesetting(Figure4).
6.Liftthebrakehandletotheengagedpositionto
ensurethatthebrakerodengagesthetrackand
thatthehandlepopsupandisretainedinthe
engagedpositionagainstthemachineframe.
7.Installthebottomshield.
3
InstallingtheInterlockRod
Partsneededforthisprocedure:
1Interlockrod
1Hairpincotter
1
Controlspring
1Washer
Procedure
1.Inserttheinterlockrodthroughthebottomhole
nexttothegrindercontrollever(Figure7).
g018758
Figure7
1.Interlockrod3.Washer
2.Controlspring
4.Hairpincotter
2.Slidethecontrolspringandwasherontothe
interlockrod(Figure7).
3.Securethespringandwasherinplacewiththe
hairpincotter(Figure7).
5