Operator's Manual

4
Safety Decals
(# 99-4356)
(# 99-4353)
(# 99-4354)
(# 99-4348)
(# 99-4352)


Specifications
Note: Specifications and design are subject to change
without notice.
Width 24.5 inches (62 cm)
Length 49 inches (125 cm)
Height 13 inches (33 cm)
Weight (without auger) 285 lbs (129 Kg)
Bit working length 11 inches (28 cm)
Bit diameter 1.75 inches (4.4 cm)
Impact energy class
175 ft·lbs (237 J)
Blows per minute 1,200
Flow range 4 to 10 gpm (15 to
38 lpm)
Stability Ratings
To determine the degree of slope you can traverse with the
breaker installed on a traction unit, find the stability rating
for the hill position you want to travel in the following
table, then find the degree of slope for the same rating and
hill position in the Stability Data section of the traction
unit operator’s manual.
Orientation Stability Rating
Front Uphill
D
Rear Uphill
D
Side Uphill
C
Note: If you have a traction unit other than the Dingo TX,
do not use the counterweight with the breaker or the
traction unit will be less stable in the front and side uphill
positions.