Installation Instructions

ManualsBrandsToro ManualsAttachmentsSnow Canopy, TX 1000 Compact Tool Carrier

FormNo.3443-799RevA

SnowCanopy

TX1000CompactToolCarrier

ModelNo.22584

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

UseofthisproductmaycauseexposuretochemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orotherreproductiveharm.

Safety

WARNING

Thiscanopydoesnotprotectyoufromfallingobjectsorduringrollovers.

Donotusethecanopyasafallingobjectorrolloverprotectionsystem.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Frontreceivertube2

Left,rearreceivertube

Right,rearreceivertube1

Windshieldbracket1

Hoseguard2

Bolt(1/4x1-1/2inches)

Bolt(5/16x1inch)

Bolt(5/16x1-1/4inches)

Bolt(1/4x2inches)

Locknut(1/4inch)

Installthereceivertubes.

8111LyndaleAvenueSouth

Bloomington,MN55420Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3443-799*

Summary of content (8 pages)

PAGE 1
Form No. 3443-799 Rev A Snow Canopy TX 1000 Compact Tool Carrier Model No. 22584 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning Use of this product may cause exposure to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Safety WARNING This canopy does not protect you from falling objects or during rollovers. Do not use the canopy as a falling object or rollover protection system.
PAGE 2
Procedure 3 4 Description Qty. 1 1 1 2 2 2 4 6 2 2 10 4 1 1 1 1 2 Center brace Front frame tube Rear frame tube Side frame tube Front post Rear post Bolt (1/4 x 3/4 inch) Bolt (1/4 x 1 inch) Bolt (1/4 x 1-1/4 inches) Acorn nut (1/4 inch) Locknut (1/4 inch) Fender washer Left panel Right panel Windshield Top cover Bolt (5/16 x 1-1/4 inches) 1 Preparing the Machine No Parts Required Procedure 1. Park the machine on a level surface. 2. Lower the loader arms. 3. Engage the parking brake. 4.
PAGE 3
2 Installing the Receiver Tubes Parts needed for this procedure: 2 Front receiver tube 1 Left, rear receiver tube g323568 1 Right, rear receiver tube 1 Windshield bracket 2 Hose guard 2 Bolt (1/4 x 1-1/2 inches) 2 Bolt (5/16 x 1 inch) 2 Bolt (5/16 x 1-1/4 inches) 2 Bolt (1/4 x 2 inches) 4 Locknut (1/4 inch) Figure 2 Procedure 1. 4. Hose guard 2. Bolt (5/16 x 1 inch) and retained locknut (5/16 inch) 5. Bolt (1/4 x 1-1/2 inches) and locknut (1/4 inch) 3.
PAGE 4
3 Assembling the Frame Parts needed for this procedure: 1 Center brace 1 Front frame tube 1 Rear frame tube 2 Side frame tube 2 Front post 2 Rear post 4 Bolt (1/4 x 3/4 inch) 6 Bolt (1/4 x 1 inch) 2 Bolt (1/4 x 1-1/4 inches) 2 Acorn nut (1/4 inch) 10 Locknut (1/4 inch) 4 Fender washer g341665 Figure 3 1. Hose guard 4. Locknut (1/4 inch) 2. Bolt (1/4 x 2 inches) 5. Windshield bracket 3. Receiver tube Procedure 1.
PAGE 5
2. Install the 2 side frame tubes to the rear frame tube (Figure 5 and Figure 6). 4. Install the 2 rear posts to the side frame tubes (Figure 8). Note: Install the side frame tubes so that they Note: Ensure that the heads of the bolts face bend outward and the holes for the rear posts are closer to the rear frame tube, as shown in Figure 5; ensure that the heads of the bolts face outward. outward. g323640 Figure 6 View from rear; left side shown 1. Bolt (1/4 x 3/4 inch) 4. Side frame tube 2.
PAGE 6
4 Installing the Canopy Parts needed for this procedure: 1 Left panel 1 Right panel 1 Windshield 1 Top cover 2 Bolt (5/16 x 1-1/4 inches) g323638 Procedure 1. Figure 11 1. Right panel Install the left and right panels, using the hook and loop fasteners to secure them to the frame, as shown in Figure 10 and Figure 11. 2. 2. Windshield Install the windshield, using the hook and loop fasteners to secure it to the panels, front frame tube, and the windshield bracket (Figure 11).
PAGE 7
g323732 Figure 13 1. Spring 5. 2. Bolt (5/16 x 1-1/4 inches) Hook the springs from the panels on the bolt. Operation Transporting the Machine Before transporting the machine, unhook the springs and lift the canopy frame out of the receiver tubes. Important: Do not transport the machine with the canopy installed.
PAGE 8
California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.