Operator's Manual

Note:Disposeoftheusedoilatacertiedrecycling
center.
7.Removetheoilllcapandslowlypourapproximately
80percentofthespeciedamountofoilintothe
engine(Figure16).
8.Slowlyaddadditionaloiltobringtheoilleveltothe
upperlimitmarkonthedipstick.RefertoCheckingthe
Engine-OilLevel(page9).
9.Installtheoilllcap.
CleaningtheSedimentCup
ServiceInterval:Every100hours
Yearlyorbeforestorage
Underneaththefuelvalveisasedimentcuptocatchdirtin
thefuel.
1.MovethefuelvalvetotheOffposition,alltheway
totheleft.
2.Unscrewthesedimentcup.Makesurenottomisplace
theO-ring(Figure17).
Figure17
1.Sedimentcup2.O-ring
3.CleanthereservoirandtheO-ringusingacleaning
solventanddrycarefully.
Note:MakesurenottomisplacetheO-ring.
4.PuttheO-ringinplaceinthegrooveofthecupand
replacethesedimentcup.
5.TurnthefuelvalvetotheOnposition,allthewayto
theright,andcheckforleaks.
Note:Ifitleaks,replacetheO-ring.
ServicingtheSparkPlug
ServiceInterval:Every100hours—Checkthesparkplugs.
Ensurethattheairgapbetweenthecenterandsideelectrodes
iscorrectbeforeinstallingthesparkplug.Useasparkplug
wrenchforremovingandinstallingthesparkpluganda
gappingtool/feelergaugetocheckandadjusttheairgap.
Installanewsparkplugifnecessary.
Type:BPR6ES(NKG)orequivalent
AirGap:0.70-0.80mm(0.28–0.031inch)
RemovingtheSparkPlug
1.Lowerthegrinderandstopthemachine;Referto
StoppingtheEngine(page10).
2.Pullthewireoffthesparkplug(Figure18).
Figure18
1.Sparkplug
2.Wire
3.Cleanaroundthesparkplug.
4.Removethesparkplugandthemetalwasher.
CheckingtheSparkPlug
1.Lookatthecenterofthesparkplug(Figure19).Ifyou
seelightbrownorgrayontheinsulator,theengineis
operatingproperly.Ablackcoatingontheinsulator
usuallymeansthattheaircleanerisdirty.
Important:Donotcleanthesparkplug.Always
replacethesparkplugwhenithasablackcoating,
wornelectrodes,anoilylm,orcracks.
Figure19
1.Centerelectrodeinsulator3.Airgap(nottoscale)
2.Sideelectrode
2.Checkthegapbetweenthecenterandsideelectrodes
(Figure19).Bendthesideelectrode(Figure19)ifthe
gapisnotcorrect.
14