Operator's Manual

2.Pullthewireoffofthesparkplug(Figure14).
Figure14
1.Sparkplug
2.Wire
3.Cleanaroundthesparkplug.
4.Removethesparkplugandthemetalwasher.
CheckingtheSparkPlug
1.Lookatthecenterofthesparkplug(Figure15).Ifyou
seelightbrownorgrayontheinsulator,theengineis
operatingproperly.Ablackcoatingontheinsulator
usuallymeansthattheaircleanerisdirty.
Important:NeverCleanthesparkplug.Always
replacethesparkplugwhenithasablackcoating,
wornelectrodes,anoilylm,orcracks.
Figure15
1.Centerelectrodeinsulator3.Airgap(nottoscale)
2.Sideelectrode
2.Checkthegapbetweenthecenterandsideelectrodes
(Figure15).Bendthesideelectrode(Figure15)ifthe
gapisnotcorrect.
InstallingtheSparkPlug
1.Threadthesparkplugintothesparkplughole.
2.Tightenthesparkplugto20ft-lb(27N-m).
3.Pushthewireontothesparkplug.
BrakeMaintenance
AdjustingtheParkingBrake
1.Loosenthesetscrewonsideofbrakeleverknob.Turn
theknobclockwisetotightenthebrake;adjustcounter
clockwisetoloosenthebrake.Theleftwheelshould
lockcompletelywhenthebrakeisset.
2.Tightenthesetscrew .
15