Operator's Manual

6
Product Overview
Figure 3
1. Coupler 8. Hopper
2. Safety Chains 9. Key switch
3. Jack stand 10. Fuel cap
4. Chute locking pin 11. Air filter
5. Deflector locking knob 12. Throttle
6. Battery box 13. Choke
7. Flywheel bearing 14. Fuel filter
Controls
Hopper Latch
The hopper, mounted on the side of the machine, swings
down for machine operation. The revolving blades mounted
on a flywheel behind the hopper turns branches fed into the
hopper into “chips”. The chipper can chip branches and vines
ranging in size up to 6” in diameter.
To release the hopper latch (Figure 4), pull on the handle and
rotate up or down to engage latch pin behind stop.
Pull hopper down to open.
Figure 4
1. Hopper latch
7
6
5
8
4
12 13
14
11
3
1
2
9
10