Operator's Manual

GrindingaStump
DANGER
Themachinewillcutandamputatehandsandfeet.
•Stayintheoperator'spositionwhilethemachine
isrunningandkeepawayfromthecutting
wheel.
•Keepallbystandersasafedistancefromthe
machine.Shutoffthemachineimmediatelyif
anypeopleoranimalsentertheworkarea.
•Neverleavearunningmachineunattended.
Alwaysshutofftheengineandverifythecutting
wheelhasstoppedrotating.
WARNING
Grindingastumpthrowswoodchips,soil,and
otherdebrisintotheair,whichcouldinjureyouor
bystanders.
•Alwaysweareyeprotectionandahardhatwhen
usingthemachine.
•Ensurethateveryone,includingchildrenand
animals,maintainadistanceofatleast15m(50
feet)fromthemachine.
1.SetthrottletotheDISENGAGEposition,startthe
engine,andallowthemachinetowarmupfor2
minutes.
2.Pushthehandledownenoughtoraisethecutting
wheelofftheground(Figure8).
Figure8
1.Pivotpoint2.Pivotpointwhenthe
parkingbrakeisengaged
3.Movethemachinetothefrontofthestumpandset
theparkingbrake.
4.MovethrottleuptotheENGAGEposition.Thecutting
wheelwillbeginrotating.
5.Swingthecuttingwheelto1side(Figure8),then
loweritapproximately1to2.5cm(1/2to1inch)into
thefront-topcornerofthestump.Swingthecutting
wheelbackandforth,loweringthecuttingwheel
approximately1to2.5cm(1/2to1inch)beforeeach
sweep,untilyouhaveremovedthefrontportionofthe
stumptogroundlevel(AthroughDinFigure9).
Figure9
11