Reference Guide

Revision 1 02-24-2021 Toro Form No 3445-727 Rev A
Perform the necessary maintenance procedures as specified in the following tables (for complete procedures, refer to the Operator’s Manual):
Tool Inspection Process
Action
Recommended Parts
Part Number
Description
Clean the air filter cyclone housing, air channels, and air intake screen.
Check the condition of the teeth; rotate or replace any that are worn or damaged;
torque the nuts for all teeth.
Check condition of the chip control flaps.
Check the drive belt tension
120-1203
V-belt
Check for missing or damaged parts, especially safety devices, shields, guards,
and decals; ensure that the machine starts and operates properly.
Tool Rental Center
Spring Maintenance
Guide
SGR-13 Stump Grinder
Model No.
22615HD—316000001 and Up
Supplier Technical Support #:
800-888-9926 (US and Canada)
Supplier Website: www.Toro.com
PURPOSE
Follow the directions below to maintain this tool.
SAFETY
Refer to the product Operator’s Manual for complete safety information.