Service Manual
GENERAL INFORMATION 1-7
Torque and Locking Agent
Fastener
Torque
Remarks
N
1
m
kgf
1
m ft
1
lb
Lubrication System:
Engine Drain Plugs 6.9 0.70 61 in
1
lb
Oil Passage Plug 3.9 0.40 35 in
1
lb
Oil Pump Cover Plate Mounting Bolts 5.9 0.60 52 in
1
lb
Oil Filter in the text
Camshaft/Crankshaft:
Crankcase Cover Bolts
25 2.6 19.0 =S
Breather Chamber Cover Bolts 5.9 0.60 52 in
1
lb
Electrical System:
Starter Coil Screws 3.4 0.35 30 in
1
lb
Flywheel Bolt 56 5.7 41
Fan Housing Bolts 5.9 0.60 52 in
1
lb
Screen Screws 5.9 0.60 52 in
1
lb
Regulator Screws 3.4 0.35 30 in
1
lb
Ignition Coil Bolts (Studs) 7.8 0.80 69 in
1
lb
Ignition Coil Bolts (Bolts) 5.9 0.60 52 in
1
lb
Starter Motor Mounting Bolts 15 1.5 11
Starter Motor Through Bolts 3.9 0.40 35 in
1
lb
Recoil Starter Mounting Nuts 5.9 0.60 52 in
1
lb
Recoil Starter Retainier Screw 7.8 0.80 69 in
1
lb
Spark Plugs 22 2.2 16
The table below, relating tightening torque to thread diameter, lists the basic torque for the bolts and nuts. Use this
table for only the bolts and nuts which do not require a speciļ¬c torque value. All of the values are for use with dry
solvent-cleaned threads.
Basic Torque for General Fasteners
Threads dia
Torque
(mm) N
1
m kgf
1
m ft
1
lb
4 2.0 0.20 17 in
1
lb
5 3.4 0.35 30 in
1
lb
6 5.9 0.60 52 in-lb
8 15 1.5 11