Service Manual

ELECTRICAL SYSTEM 8-21
Starter System
•
Remove:
Screw [A]
Washer [B]
Retainer [C]
Center Spring [D]
Washer [E]
Pawls [F]
Return Springs [G]
When removing the reel [A], be careful that the recoil spring
[B] under the reel does not fly loose and cause injury. The
spring is under great pressure.
NOTE

There should be no spring tension on the reel when removing it. If
tension is felt, push the reel back into place and gently “wiggle” it
until the reel can be easily removed.
•
Slowly lift the reel straight up out of the case [C].
If the recoil spring cassette is sticking with the reel, be careful
that the cassette does not drop.
Be careful that the recoil spring does not fly loose from the
cassette and cause injury. The spring is under great pressure.
•
Slowly lift the recoil spring cassette, straight up out of the case or
reel.
If the recoil spring [A] must be removed from the cassette [B], hold
the cassette with the opening side facing downward in a suitable
container and tap the cassette to remove the recoil spring.