Service Manual

FUEL SYSTEM 3-17
Air Cleaner
Element Removal

Refer to Air Element Removal in the Periodic Maintenance Chapter
(2nd chapter).
Element Installation

Refer to Air Element Instalation in the Periodic Maintenance Chapter
(2nd chapter).
Element Cleaning and Inspection

Refer to Air Element Cleaning and Inspection in the Periodic Mainte-
nance Chapter (2nd chapter).
Cleaner Body Removal
•
Remove the elements (see Periodic Maintenance chapter).
•
Remove the cleaner body mounting bolts [A] and holder plate nuts
[B].
•
Pull the breather tube [A] off the pipe at the back of the body, and
remove the cleaner body [B].
Cleaner Body Installation
•
Connect the breather tube from the crankcase to the pipe at the back
of the cleaner body.
•
Tighten the holder plate nuts and cleaner body mounting bolts.
Torque - Holder Plate Nuts: 5.9 N 1 m (0.60 kg 1 m, 52 in
1 lb)
Cleaner Body Mounting Bolts 5.9 N
1 m (0.60 kg
1 m, 52 in
1 lb)
Housing (Case and Body) Inspection

Refer to Air Cleaner Housing (Case and Body) Inspection in the
Periodic Maintenance Chapter (2nd chaper).