Service Manual

CAMSHAFT/CRANKSHAFT 7-3
Specifications
Item
Service Limit
Camshaft, Tappet:
Cam lobe height Intake 29.131 mm (1.1469 in.)
Exhaust 29.131 mm (1.1469 in.)
Camshaft jour nal diameter PTO side 15.985 mm (0.6293 in.)
Flywheel side 15.985 mm (0.6293 in.)
Camshaft bearing inside diameter Crankcase 16.136 mm (0.6352 in.)
Crankcase cover 16.136 mm (0.6352 in.)
Crankshaft, Connecting Rod:
Connecting rod bend 0.15/100 mm
(0.006/3.94 in.)
Connecting rod twist 0.15/100 mm
(0.006/3.94 in.)
Connecting rod big end width 18.80 mm (0.74 in.)
Crankpin width 39.50 mm (1.56 in.)
Connecting rod big end inside diameter 33.055 mm (1.301 in.)
Crankpin Outside diameter 32.94 mm (1.297 in.)
Crankshaft runout 0.05 mm (0.002 in.) TIR
Crankshaft journal diameter PTO side 34.90 mm (1.374 in.)
Flywheel side 34.94 mm (1.376 in.)
Crankcase:
PTO shaft bearing inside diameter
Crankcase Cover 35.15 mm (1.384 in.)
Crankshaft journal bearing inside diameter
Crankcase 35.15 mm (1.384 in.)
Sealant - Kawasaki Bond (Silicone Sealant): 56019–120Bond (Silicone Sealant): 56019–120