Operator's Manual

Figure51
1.Snapring4.Gasket
2.Cap
5.Wheelwithbearings
3.Bolt
8.Whenthetrackisoffoftheroadwheel,removeit
fromthemachine(Figure50).
9.Beginningatthedrivesprocket,coilthenewtrack
aroundthesprocket,ensuringthatthelugson
thetracktbetweenthespacersonthesprocket
(
Figure50).
10.Pushthetrackunderandbetweentherearandcenter
roadwheels(
Figure50).
11.Startingatthebottomofthefrontroadwheel,install
thetrackaroundthewheelbyrotatingthetrack
rearwardwhilepushingthelugsintothewheel.
12.Ifyouremovedthefront,outsideroadwheel,install
itatthistimeusingtheboltandgasketremoved
previously.Torquetheboltto75ft-lb(102N-m)
andthenclean,grease,andinstallthecapandsnap
ringasinstructionintheCheckingandGreasingthe
RoadWheelssection.
13.Installthetensioningboltandjamnut.
14.Torquethetensioningboltto24to30ft-lb(32.5to
40N-m)totightenthetrack.
15.Ensurethatthetrackdeectslessthan1/4to3/8
inch(0.6to1cm)when45lb(20.6kg)offorceis
appliedtothetrackspan.Adjustthetorqueonthe
tensioningboltasneeded.
16.Tightenthejamnut.
17.Tightentheclampboltsandtorqueto75ft-lb(102
N-m).
18.Lowerthemachinetotheground.
19.Repeatsteps3through18toreplacetheothertrack.
CheckingandGreasingtheRoad
Wheels
ServiceInterval:Every250hours
1.Removethetracks;refertoReplacingtheTracks.
2.Removethesnapringandcapfromaroadwheel
(Figure52).
Figure52
1.Roadwheel
3.Snapring
2.Roadwheelcap
3.Checkthegreaseunderthecapandaroundthe
gasket(
Figure52).Ifitisdirty,gritty,ordepleted,
cleanoutallofthegrease,replacethegasket,and
addnewgrease.
4.Ensurethattheroadwheelturnssmoothlyonthe
bearing.Ifitisfrozen,contactyourAuthorized
ServiceDealertoreplacetheroadwheel.
5.Placethegreasedroadwheelcapoverthebolthead
(
Figure52).
6.Securetheroadwheelcapwiththesnapring
(Figure52).
7.Repeatsteps2through6forall12roadwheels.
8.Installthetracks;refertoReplacingtheTracks.
38