Operator's Manual

5.Installthereplacementhydrauliclterandller
cap(Figure58)andtorquetheboltontopto13
to15.5N∙m(110to140in-lb).
6.Cleanupanyspilleduid.
7.Installthetopcover.
ChangingtheHydraulic
Fluid
ServiceInterval:Every400hours/Yearly(whichever
comesrst)
1.Parkthemachineonalevelsurface,engage
theparkingbrake(ifapplicable),andlowerthe
hydrauliclift.
2.Shutofftheengineandremovethekey.
3.Allowthemachinetocoolcompletely.
4.Removethetopcover.
5.Removethehydraulic-tankllercapandlter
(Figure58).
6.Placeadrainpancapableofholding37.8L(10
USGallons)underthehydraulictank.
7.Pinchthehoseclampandslidetheclampand
hoseoffthettingonthehydraulictank,allowing
thehydraulicuidtodrainfromthehoseand
tankintothepan.
g007840
Figure59
1.Hose
2.Hydraulic-tanktting
3.Hoseclamp
8.Whennished,installthehoseontothetting
andsecureitwiththehoseclamp.
Note:Disposeoftheusedoilatacertied
recyclingcenter.
9.Fillthehydraulictankwithhydraulicuid;refer
toHydraulicFluidSpecications(page39).
10.Installthehydrauliclterandllercap(Figure
58)andtorquetheboltontopto13to15.5N∙m
(110to140in-lb).
11.Starttheengineandletitrunforafewminutes.
12.Shutofftheengine.
13.Checkthehydraulic-uidlevelandtopitoffif
necessary;refertoCheckingtheHydraulic-Fluid
Level(page40).
14.Cleanupanyspilleduid.
15.Installthetopcover.
41