Service Manual

STARTER SYSTEM 8-11
Electric Starter System
•
Install the insulator [A].
•
Install the end cover so that the slit [A] fit the groove [B]
of the grommet.
•
Tighten the through bolts.
•
Engage the hook on the starter solenoid with the hook [A]
on the pinion gear fork [B].
•
Tighten the solenoid mounting nut.
FR a
nd FS Models
•
Using the suitable tool, hold the brushes.
•
Install the armature assembly to the brush plate assem-
bly.
•
Install the yoke so that the slit [A] fit the groove [B] of the
brush plate assembly.