Service Manual

4-4 COOLING SYSTEM
Cooling Fan
Cooling Fan Removal
•
Refer to the Flywheel and Stator Coil Removal in the Elec-
trical System chapter.
Cooling Fan Installation
•
Refer to the Flywheel and Stator Coil Installation in the
Electrical System chapter.
Cooling Fan Inspection
•
Remove the fan housing (see Flywheel and Stator Coil
Removal in the Electrical System chapter).
•
Visually inspect the blades [A] in the cooling fan.
If they have any crack, warp or damage, replace the cool-
ing fan with a new one.
If any mud or dust have stuck to the cooling fan, clean it.
•
Wash the cooling fan in detergent and water.
CAUTION
Do not clean the cooling fan in oil solvent. It may
be damage by oil solvent.