Service Manual
STARTER SYSTEM 8-15
Electric Starter System
•
Set the multimeter selector switch to the R × 1 Ω posi-
tion and measure the resistance between the negative
brushes and starter motor yoke.
If the meter dose not read close ∼ 0 Ω, the yoke assembly
is faulty. Replace it.
FX Models [A]
FR and FS Models [B]
Negative Brush to Ground Resistance
Close ∼ 0 Ω
Pinion Clutch Inspection
FX Models
•
Remove the pinion clutch.
•
Turn the pinion gear [A] by hand. The pinion gear should
turn counterclockwise freely, but should not turn clock-
wise.
If the pinion clutch dose not operate as it should, or if it
makes noise, replace the pinion clutch.