Service Manual

3-36 FUEL SYSTEM
Air Cleaner
•
Loosen the clamp [A].
•
Remove:
Inlet Hose [B]
Foam Element [C] (FS Models only)
Element Installation
FX Models
•
Slide the secondary element and primary element into
place in the air cleaner body.
•
Install the cap direction as shown in the figure.
Upside [A]
41° [B]
•
Fasten the two retaining clamps [C].
FR and FS Mod
els
•
Install the form element [A] to the paper element [B] (FS
Models only).