Service Manual
4-6 COOLING SYSTEM
Engine Shroud
FR and FS Models
•
Install the engine shrouds.
NOTE
○
Bend the engine shroud (regulator side) [A] only within
the shown range.
70° [B]
•
Attach the stator coil lead, ignition coil lead and solenoid
valve connector lead to the engine shroud with the band.
•
Tighten:
Torque - Engine Shroud Bolts: 8.8 N·m (0.90 kgf·m, 78 in·lb)
•
Install the removed parts (see appropriate chapters).