Service Manual
9-12 ELECTRICAL SYSTEM
Charging System
FR and FS Models
•
Cut off the band [A].
FR Models [B]
FS Models [C]
Flywheel and Stator Coil Installation
•
Install the stator coil and hold the stat
or coil lead to the
clamp.
•
Tighten:
Torque - Stator Coil Screws: 3.4 N·m (0.35 kgf·m, 30 in·lb)
•
Using a cleaning fluid, clean off any oil or dirt on the fol-
lowing portions and dry them with a clean cloth.
Crankshaft Tapered Portion [A]
Flywheel Tapered Portion [B]
•
Fit the woodruff key [C] securely in the slot in the crank-
shaft before installing the flywheel.
•
Install the flywheel onto the crankshaft taper so that the
woodruff key fits in the key way in the hub of the flywheel.
•
Install the bracket [A] and washer [B].
•
Tighten:
Torque - Flywheel Bolt [C]: 56 N·m (5.7 kgf·m, 41 ft·lb)
•
Install the ignition coils (see Ignition Coil Installation).