Service Manual
FUEL SYSTEM 3-23
Carburetor
Carburetor Installation
•
Clean the mating surface of the carburetor and inlet man-
ifold.
•
Replace the gaskets [A] with new ones.
•
Install the insulator [B], carburetor [C] and gaskets se-
quence as shown in the figure.
•
Apply dielectric grease to the solenoid valve connector.
•
Connect the solenoid valve connector.
○
The tongue [D] of the gaskets face the PTO side (FX Mod-
els only).
FX Models [E]
FR and FS Models [F]