Service Manual

CAMSHAFT/CRANKSHAFT 7-13
Breather
Breather Valve Inspection
•
Inspect the reed valve [A] for breakage, crack or distor-
tion, replace it with a new one if necessary.
•
Inspect the plate [B] for damage or rough contact surface,
replace it with a new one if necessary.
•
Inspect the valve seating surface. The surface should be
no nicks or burrs.
Breather Pipe Removal
•
Remove:
Breather Chamber Cover (see Breather Valve Removal)
Breather Pipe [A]
Breather Pipe Installation
•
Install the breather pipe [A].
•
Install the removed parts (see appropriate chapters).