Service Manual
FUEL SYSTEM 3-37
Air Cleaner
•
Install the inlet hose [A], and tighten the clamp [B].
○
Check that the element [C] is horizontally installed.
•
Install the inlet hose [A], and tighten the clamp [B].
•
Close the air cleaner cover [A].
Ele
ment Cleaning and Inspection
Air cleaner elements are not recommended to be cleaned,
and each air cleaner element should be replaced with new
o
nes.
•
Refer to the Element Cleaning and Inspection in the Pe-
riodic Maintenance chapter.
Air Cleaner Body and Bracket Removal
FX Models
•
Remove the air cleaner elements, if necessary (see Ele-
ment Removal).
•
Loosen the clamp [A].
•
Remove:
Bolt [B]
Holder Bracket [C]
•
Take out the air cleaner body [D] together with the inlet
hose [E].