Operator's Manual

Troubleshooting
Problem
PossibleCauseCorrectiveAction
1.Thebatteryisdischarged.
1.Chargethebatteryorreplaceit.
2.Theelectricalconnectionsare
corrodedorloose.
2.Checktheelectricalconnectionsfor
goodcontact.
Thestarterdoesnotcrank.
3.Therelayorswitchisdamaged.
3.ContactyourAuthorizedService
Dealer.
1.Thefueltankisempty.1.Fillthefueltankwithgasoline.
2.Thefuelshutoffvalveisclosed.2.Openthefuelshutoffvalve.
3.Thecontrolsarenotinneutral.3.Movethecontrolstoneutral.
4.Theaircleanerisdirty.
4.Cleanorreplacetheaircleaner
elements.
5.Asparkplugwireislooseor
disconnected.
5.Installthewireonthesparkplug.
6.Asparkplugispitted,fouled,orthe
gapisincorrect.
6.Installanew,correctlygappedspark
plug.
Theenginewillnotstart,startshard,or
failstokeeprunning.
7.Dirt,water,orstalefuelisinfuel
system.
7.ContactyourAuthorizedService
Dealer.
1.Theengineloadisexcessive.1.Reducegroundspeed.
2.Theaircleanerisdirty.
2.Cleanorreplacetheaircleaner
elements.
3.Theoillevelincrankcaseislow.
3.Checkandaddoiltothecrankcase.
4.Thecoolingnsandairpassages
undertheengineblowerhousingare
plugged.
4.Removeanyobstructionsfromthe
coolingnsandairpassages.
5.Asparkplugispitted,fouled,orthe
gapisincorrect.
5.Installanew,correctlygappedspark
plug.
Enginelosespower.
6.Dirt,water,orstalefuelisinfuel
system.
6.ContactyourAuthorizedService
Dealer.
1.Theengineloadisexcessive.1.Reducegroundspeed.
2.Theoillevelincrankcaseislow.
2.Checkandaddoiltothecrankcase.
Theengineoverheats.
3.Theenginecoolingsystemisdirty.
3.Cleantheengineandengineoilcooler.
Abnormalvibration.1.Theenginemountingboltsareloose.1.Tightentheenginemountingbolts.
1.Thehydraulicuidlevelislow.1.Checkandaddhydraulicuid.
2.Thetowvalvesareopen.
2.Closethetowvalves.
Themachinedoesnotdrive.
3.Thehydraulicsystemisdamaged.
3.ContactyourAuthorizedService
Dealer.
1.Achunkofwoodorarockiscaught
inthegrinder.
1.Stoptheengineandremovethe
obstructionwithastick.
2.Thegrinderdrivesystemisdamaged.
2.ContactyourAuthorizedService
Dealer.
Thegrinderdoesnotturn
3.Thehydraulicsystemisobstructed,
contaminated,ordamaged.
3.ContactyourAuthorizedService
Dealer.
1.Theteethareworn.1.Rotateorreplacetheteeth.
2.Thehydraulicsystemisoverheated.
2.Stoptheengineandallowthesystem
tocool.
Thegrinderdoesnotcutfastenough
3.Thehydraulicsystemisobstructed,
contaminated,ordamaged.
3.ContactyourAuthorizedService
Dealer.
TheGrinderheaddoesnotlowerorraise.1.Thelift/lowercontrolvalveisclosed.
1.Turnthecontroldialcounterclockwise
toopenit.
Thehydraulicoiloverowsorisveryhot.1.Thecoolingfanisnotfunctioning.1.Checkthefuseandreplaceitif
necessary.
41