Operator's Manual

Seeder-controlLever
Theseeder-controllever(Figure6)islocatedontheright
handlebar.
Pushtheleverforwardtostarttheseedow ,andpullit
rearwardtostoptheseedow.
ParkingBrake
Settheparkingbrakewheneveryouleavethemachine
unattendedandwhenperformingmaintenance.Toengage
theparkingbrake,pullthebrakerodoutanddown,locking
itintheoutposition.Todisengagethebrake,pullthebrake
upuntilitsnapsbackintothemachine.
G017939
1
Figure7
(Rearofmachineshown)
1.Parkingbrake
Hydrostatic-driveBypassLever
Thehydrostatic-drivebypasslever(Figure8)releasesthe
hydrostatic-drivesystemsoyoucanmovethemachineby
hand,withouttheenginerunning.
Fornormaloperatingposition,pulluponthehandleand
pushthehandleinuntilall3notchesareinsidetheframe.
Note:Thelastnotchonthehandledoesnotlatchonthe
slot.
Toreleasethedrivewheels,pulluponthehandleandpullit
outuntilthelastnotchengagesintheslot.Thenpushthe
handledown.
Figure8
1.Handlein—normaloperatingposition
2.Allnotchesinsideframe
3.Handleout—hydrostatic-driverelease
4.Lastnotchengagedinslot
Specications
Note:Specicationsanddesignaresubjecttochange
withoutnotice.
Width
76cm(30inches)
Length(operating)137cm(54inches)
Length(withhandlestored)95.25cm(37.5inches)
Height(operating)113cm(44.5inches)
Height(withhandlestored)73.5cm(29inches)
Weight
120.2kg(265lb)
TorqueRequirements
BoltLocationTorque
Enginemountingbolts
37to45N-m(27to33ft-lb)
Clutchmountingbolts66to83N-m(49to61ft-lb)
Slicershaftnut88to115N-m(65to85ft-lb)
Attachments/Accessories
Approvedattachmentsandaccessoriesareavailableforuse
withthemachinetoenhanceandexpandthecapabilities
ofthemachine.ContactanAuthorizedServiceDealeror
Distributororgotowww.Toro.comforalistofallapproved
attachmentsandaccessories.
10